Chevy TrailBlazer, TrailBlazer SS and GMC Envoy Forum banner

Molded Wood grain kit for 2006 trailblazer

4255 Views 13 Replies 7 Participants Last post by  NORTHFACEPA
Does anyone know where to get a good molded wood grain kit? Woodview has a nice kit but not enough pieces. They only have the dash mold and the handle covers. The pictures on their site show a mold for the center vent as well. I don't like the flat look. Any help will be greatly appreciated.
1 - 14 of 14 Posts
would it be worth looking for an envoy with the wood trim interior and see what needs to be modded to fit your TB? might be the only way you get a complete kit..:m2:
i found a few the other day on ebay, they were all by the same company, gmdash.com but the site itself doesn't list trailblazers...they *look* like nice peices and the ebay prices weren't too bad...and they seem willing to do custom work...might be worth looking into
Thanks!!! I will check them out.
Does anyone know where to get a good molded wood grain kit? Woodview has a nice kit but not enough pieces. They only have the dash mold and the handle covers. The pictures on their site show a mold for the center vent as well. I don't like the flat look. Any help will be greatly appreciated.
did you ever find a good dash kit? i have been looking forever!
gmdash.com has the best looking kits. They are a bit more expensive but look way better on the pictures. I haven't ordered the kit yet. It looks like they take original parts and apply a woodgrain coating. Here is the message I received the gentleman at gmdash.com

We have the following core parts except for the bow-ties. We can do those or any parts not on our list as long as you provide the parts to us. You can see pictures of our parts on the web site below.
Greg 
 
Greg Bowsher
autodynamicswest.com
gmdash.com
714-585-8001
WHOLESALE PRICE LIST 02-09 SS TRAILBLAZER, LT,LS TB
CORE EXCHANGE PROGRAM
DASH $230.00 + $120.00 CORE DEPOSIT
DOUBLE CENTER VENT BEZEL $60.00 + $40 CORE DEPOSIT
SINGLE PASSENGER VENT BEZEL $40.00 + $20.00 CORE DEPOSIT
4 DOOR PULL BEZELS $120.00 + $40.00
2 FRONT POWER SEAT CONTROL BEZELS $98.00 + $40.00 CORE DEPOSIT
SHIFT/CUPHOLDER BEZEL $110 + $75 CORE DEPOSIT
CENTER CONSOLE INCLUDING THE SHIFT & GLOVE BOX $385 + $95 CORE
STEERING WHEEL $350.00 + $125.00 CORE DEPOSIT
ENGINE COVER $249.00 + $85 CORE DEPOSIT
FUSE COVER $60
CHEVY GRILL BOW TIE $65 + $18 CORE DEPOSIT
 
The replacement carbon fiber engine cover is a GM part with the carbon fiber finish and clear coat over it. The cost is $249 + $85 core deposit + $38 shipping based on our core exchange program. Your $85 core deposit is fully refunded when the old part is returned to us within 30 days. You can remove your SS emblem and reattach it or use the red SS logo that we will send with it.
See less See more
Try Edashkit. Lots of options and colors, real wood and "wood look". Good prices and fast shipping. I have one of their kits in my HHR.

http://www.edashkit.com
Try Edashkit. Lots of options and colors, real wood and "wood look". Good prices and fast shipping. I have one of their kits in my HHR.

http://www.edashkit.com
Can you post pics?
I hate the wood grain look in my envoy. I think I am going to paint over it this week.
Can you post pics?
Sure, I hope this is helpful. The color is Titanium Burl Wood. We didn't like the look of the more traditional wood color with the gray interior. Its the fake wood. The HHR interior is very modern, but very boring. I think the kit does wonders and gives it a more finished look. The pieces are actually some sort of high impact, flexible vinyl. Also, they'll send you two samples for $5 including shipping. They take the $5 off of your order if you don't wait too long.

This photo, the door strip in the middle, the door grab, and the speaker have "wood" pieces on them:


This is pretty self explanatory:


Note the surround for the Chevy emblem and the pieces on the HVAC vents:


EDIT: This is a 56 piece kit. There are parts for the rear doors as well. They have a 27 piece kit for the TB.
See less See more
3
They send you the finished part and you send your factory part back to them to get the core back. It the same concept as getting factory wheels chromed. You order the wheels they have already chromed and you send your factory (aluminum) wheels to them to keep.
did you ever find a good dash kit? i have been looking forever!
TRY OEMDASH.COM...you dont want cheap stick on junk..oem uses your factory pieces and refinishes them..trust me you will be happy..you got to call or email for prices though..heres a sample of their work in my TB..denali blackwood trim..

Attachments

See less See more
WOW...gotta say your HHR looks great..very good color choice too..this is all just a stick on kit?? :undecided pretty impressive..really makes the interior look sharp!!
:D:yes:
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top