I was turning into a driveway of a parking lot and heard a click and it got real sluggish when i was pressing the gas(felt like it was in 4Low) but the switch was on 2Hi. I came back out to leave about an hour later and immediately after starting the whole car jumped. Now as i was driving home the indicator light on the switch was going back to 4awd and back to 2Hi but there was no driving issues during the ride home. So when i parked i tried to cycle through the modes and when i tried to go2 4Hi to 4Lo the light blinked on 4Hi and never switched to 4Lo.
4x4 switch help
1 - 7 of 7 Posts
to get to 4lo you have to be in neutral. the switch sometimes has a mind of its own.
try replacing the switch first Its around $25
+1 I've replaced the switch twice over the years due to the same issues.
Sounds normal for a dirty switch. Try turning it from end to end 100 times to try to clean the contacts up before replacing it. Always regularly exercise your 4WD system to keep it happy.
1 - 7 of 7 Posts
