Chevy TrailBlazer, TrailBlazer SS and GMC Envoy Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 8 Results
  1. The 02-09 "How-To" and DIY Section
    I'm having an issue unplugging the transmission plug that's above the transmission. The exhaust pipe is in the way to get a good grip on the plug. Can't seem to squeeze the oval enough top pop it off. Replacing the valve body and wiring harness with a rebuild unit that's had the pwm bore...
  2. General
    Hello all, New to this site and to say it has been super helpful is quite an understatement. I did some work on my TB (new valves, timing chain, water pump, etc.) and had to unplug most of the wiring harness in order to get this done. I have put it back together and I am stuck on this plug (see...
  3. OEM Issues
    I have searched and havent been able to find a solution. I have been dealing with a cyl 6 misfire that I have not been able to solve. A while back i changed spark plugs and the cyl 6 spark had a bit of rust but hadnt been misfiring at that point. This morning a felt ambitious and went under the...
  4. OEM Issues
    Hey everyone! I've been stalking this forum for about a month now since buying a 2004 Trailblazer LS. There is a TON of awesome info on just about anything I need, and even a bunch of videos. I used several of these resources to change my spark plugs and clean the throttle body at about 91,500...
  5. General
    Hi all ~ I did the unthinkable ... while changing the plugs on the 4.2L engine on my 06 Envoy, the #2 plug broke in half with the threads remaining in the engine. I'm not a mechanic by trade so changing oil and plugs are the only thing that I would even attempt on my own. This is the first time...
  6. Exhaust Mods
    I'm at 60k miles right now and I plan to install Stainless Works Headers and true duals this fall. I watched this video on youtube because I'm seeing how difficult it's going to be to install the headers. http://www.youtube.com/watch?v=XmR14swnieo In the video they mentioned installing...
  7. Exterior
    Going to remove the racks from my 05 TB. Need to know two things. Whats a quick fix for sealing the holes for the time being. And, how they should be filled properly. Thanks for any suggestions!
1-7 of 8 Results
Top