Chevy TrailBlazer, TrailBlazer SS and GMC Envoy Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. The 02-09 "How-To" and DIY Section
    Hello, I’m going to install an oil pressure gauge on the cabin and I was just wondering how others have done it? I got some copper tubing instead of the plastic tubing that was included. I’m thinking I’ll need to go backwards, up around the exhaust, then above the spark plugs then down to the...
  2. 02-09 Appearance
    I was wondering if I would be able to swap a 06-09 Envoy gauge cluster with the DIC into my 2008 Trailblazer LT currently without the DIC. I know I would have to wire a button to be able to cycle through the info, but I was wondering if it would all work properly once it’s installed. Thanks
  3. Audio and Electronics
    I bought an 03 TB a few months ago, and it is really awesome. I did her first good interior cleaning, and when dusting the instrument cluster realized that there was no plastic face protecting the gauges, so the duster moved all the needles around. I put them back to zero position and they all...
  4. The "How-To" and DIY Section
    I'm have all of my bulbs slowly going out one by one in my cluster, stereo, and ac controls (front digital). Does anyone know how many bulbs are in each. I'm planning in replacing with LEDs and not sure how many to order. Thanks in advance. ~ 2003 trailblazer, 4x4, 4.2, non-Bose
  5. General
    If I take my trail to the chevy for the recall on the gas gauge will they take care of the whole entire thing even price???:confused:
  6. Audio and Electronics
    i am currently running a kenwood KAC 7204 amp and 2 10" KFC-W2511 woofers. when i have my door open my interior lights will flicker and the battery gauge goes from about 14 to 12 up to 16 then repeats the process.. what do you think i should do?.. the headlights dont dim or the dash lights// i...
  7. Interior
    Ok I might be trying to make some gauge pods again for my Envoy. Last time I did this (On my trailblazer) I made a molding out of fiberglass. There were two problems That I didn't think about :duh:. 1. Attachment! Didn't think about how to attach the pillar since it didn't have those metal...
1-7 of 7 Results