Chevy TrailBlazer, TrailBlazer SS and GMC Envoy Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. 02-09 General Tech Q&A
    Hey guys. So I've been working on my Trailblazer lately. Needed to replace control arms AND upper ball joints. I've managed to remove the bad UBJ with a press. The boot was shredded to bits, joint was exposed and had lots of wear. Thing is, I ordered aftermarket Upper Control Arm and Ball...
  2. Tires
    Hello all, I have a couple questions about wheel spacers on my 2007 Trailblazer LT. I had to replace tires yesterday and they said they had 245/70/17 at the shop. I looked it up while I waited and it said that this tire would barely fit on the Trailblazer but would be ok. So I went ahead with...
  3. General
    Hey guys, So here is my latest video on how to tell if your ball joints are bad. Let me know what you think! **Also, if the video was helpful, give it a “thumbs up” on YouTube (it helps me out, thanks)*** https://www.youtube.com/watch?v=62bVn7E8gyk
  4. Suspension
    This How-To will show you how to use the Alltrade Tools Kit 46 Ball Joint/U Joint Service Set to replace your lower ball joints. It is important to use this tool kit because it is the only one that I have found to have the correct pieces. I will only cover the steps on how to press the ball...
  5. Suspension
    I would like to start a thread showing pics of ONLY BALL JOINT CLEARANCES WITH NO WHEEL SPACERS, preferably on Envoys. Offset wheels are OK to show. I believe this would be an extremely helpful thread for those of us who do not want to run spacers, but would like to know 'will it fit'. Please...
  6. Suspension
    Let me know what you think. Add anything? Questions? Disclaimer: This is by no means an exact how to guide. This is how “I” did it. Your open to do things my way or your own. This job was done on my 2002 TB. Im unaware if there are differences between the years or models of 360s. Ok…. So you...
1-6 of 6 Results
Top